SUPERBOLT® Turbine Tensioners

Medium Temperature Range

Technical Data
  • material: alloy steel
  • temperatures:
    –10 to +350 °C
  • nominal values valid for permanent bolting applications, incl. reaction forces
  • H650T…: jackbolts lubricated with Molykote® P37
  • H650TX…: jackbolts lubricated with JL-M

 Data sheet

General Description

SUPERBOLT® Turbine Tensioners of the H650T series are used where space is limited and the temperature elevated. They replace standard cap nuts and do not require more space than same.

They offer the advantages of multi jackbolt tensioners: simple tightening and loosening and high safety against loss of pre-tension.

Applications:

Split line on turbines, engines, pumps, compressors, etc.

Available upon request:

  • inch threads (UN and Whit)
  • D > M160
  • other sizes and specials
  • anti-corrosion protection
  • special materials
  • matierial certifications
  • higher pre-loads at temperatures below 350 °C
Type approval: American Bureau of Shipping
SUPERBOLT® products are protected by one or several patents (US patents: RE 33490; 4,846,614; 5,083,889; 6,199,453; 6,381,827; 6,112,396; 6,263,764) and corresponding foreign patents, other patents pending. SUPERBOLT® products are also covered by trademark rights.